American DJ will show a variety of new LED products at Winter 2012 NAMM.

	The Fun Factor LED is both a DMX moonflower and strobe effect.

Fun Factor LED is the latest in American DJ's lineup of products that combine multiple effects in one fixture. The Fun Factor LED is both a DMX moonflower and strobe effect -- with a total of five lenses and four strobe strips. Its moonflower effect is powered by 210 LEDs (60 red, 75 green, 45 blue, and 30 white). Its strobe effect utilizes 72 white LEDs -- for a total of 282 LEDs. Designed for small clubs, bands, roller rinks, and mobile entertainers, the unit can be operated in three modes: DMX-512, master/slave or sound active. When in master/slave or sound-active mode, it runs to built-in programs. Up to 17 Fun Factor LEDs can be linked together via the unit's IEC connectors.

An all-in-one LED par system for mobile entertainers and stage performers, the Mega Par Profile Sys includes everything four Mega Par Profile LED wash fixtures, one foot controller, one lighting stand, one stand bag, and one soft case for lighting fixtures. The fixtures themselves are slim RGB color-mixing units, each containing 109 x 10mm LEDs (26 red, 46 green, and 37 blue). The units feature American DJ's exclusive sit-flat design, with their power and DMX connectors positioned on the side, rather than the rear, giving them the versatility to be placed directly on a floor without the bracket in addition to being hung. Designed for traveling performers, the Mega Par Profile Sys is easy to set up and take down, the company says. Featuring electronic dimming and color strobing, it can be operated in 6 different modes: static color, manual dimmer color, built-in programs, auto run, sound active, and DMX-512. The entire system draws just 50W of electricity at maximum use.

Like the Mega Par Profile Sys (above), the Jelly Par Profile Sys, is a complete LED PAR system for mobile entertainers, comprised of four Jelly Par Profile LED wash fixtures, one foot controller, one lighting stand, one stand bag, and one soft case for lighting fixtures. The difference is in the casing of the fixtures themselves. The Jelly Par Profile fixtures feature American DJ's see-through plastic case, which allows LEDs to shine through, giving the unit a unique "glowing" appearance, which actually makes it two effects in one, the company says. Aside from their translucent case design, the Jelly Par Profile units offer the same features as the Mega Par Profiles, each containing 109 x 10mm LEDs (26 red, 46 green, and 37 blue). They also offer the same low-profile sit-flat design, low 50W power draw, electronic dimming, color strobing, and six operational modes: static color, manual dimmer color, built-in programs, auto run, sound active, and DMX-512.

The Double Phase LED is an dual-barrel mirrored lighting effect, which produces large color-changing beams via its two powerful 10W CREE four-in-one (red, green, blue, and white) LEDs. Featuring a 150-degree beam angle, its wide beam spread makes it suitable for nightclubs, roller rinks, bowling centers, and mobile entertainers, yet it consumes only 40W of power maximum and its long-life LEDs will run for 30,000 hours. ETL-approved, the Double Phase LED can be used safely and in compliance at a variety of installations. It can be operated in sound-active or master/slave modes to its own built-in programs, as well as with a DMX controller, and it also features dimming and strobing.

A flat mirrored scanner and a barrel mirrored scanner respectively, the InnoScan LED and InnoRoll LED are high-output 50W intelligent fixtures. Designed for clubs and discos as well as bands and DJs, each unit features six gobos plus spot and eight colors plus white, for a variety of eye-popping visual effects. Both scanners can run in 3 operational modes: DMX-512, master/slave or sound active. Both also feature multi-voltage operation: AC 100V-240V, 50/60HZ.