L&S America Online   Subscribe
Home Lighting Sound AmericaNewsLSA DirectoryEventsContacts

-Today's News

-Last 7 Days

-Business News

-People News

-Product News

-Theatre in Review

-Subscribe to News

-Subscribe to LSA Mag

-News Archive

-Media Kit

-A Theatre Project Book

-PLASA Events

Audio-Technica Now Shipping U841R Boundary Microphone

Audio-Technica U841R Boundary Microphone (pictured with XLR plug power connection)

Audio-Technica, an innovator in transducer technology for over 50 years, is now shipping its new U841R Omnidirectional Condenser Boundary Microphone. A new addition to Audio-Technica's acclaimed UniPoint line of microphones, the U841R is an update to and replacement of Audio-Technica's highly popular U841A microphone. While retaining the feature set that has made the U841A such a successful tool, the new U841R microphone is enhanced with the addition of internal electronics that do not require an external power module. The mic features an integral TA3M output connector and includes a 25' TA3F-to-XLRM cable.

The U841R delivers exceptionally intelligible audio reproduction in a super-compact, low-profile design. Equipped with UniGuard RFI-shielding technology, this omnidirectional condenser boundary microphone is designed to capture audio for clear, highly intelligible sound reinforcement, professional recording, television, and conferencing in surface-mount applications. The U841R has a 360-degree pickup angle and operates on phantom power.

U841R features:
* UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
* Small-diameter capsule near boundary eliminates phase distortion and delivers clear, high-output performance
* Heavy die-cast case and silicone foam bottom pad minimize coupling of surface vibration to the microphone
* Low-profile design with low-reflectance black finish for minimum visibility
* Operates on phantom power

U841R specifications:
* Element: Fixed-charge back plate permanently polarized condenser
* Polar pattern: Omnidirectional in hemisphere above mounting surface
* Frequency response: 40-20,000Hz
* Open circuit sensitivity: -35dB (17.7mV) re 1V at 1Pa
* Impedance: 200ohms
* Maximum input sound level: 130dB (1kHz at 1-percent THD)
* Dynamic range: 105dB (1kHz at Max SPL)
* Signal-to-noise ratio: 69dB (1kHz at 1Pa)
* Phantom power requirements: 11-52V DC, 2mA typical
* Weight: 3.0oz (84g)
* Dimensions: 2.56" (65.0mm) diameter, 0.59" (15.0mm) height
* Cable: 25.0' (7.6m) long (permanently attached to microphone), 0.13" (3.2mm) diameter, two-conductor, shielded cable with TA3F-type connector
* Accessories furnished: soft protective pouch


(25 October 2017)

E-mail this story to a friendE-mail this story to a friend

LSA Goes Digital - Check It Out!

Follow us on Facebook  Follow us on Twitter