AAdynTech Announces the Quad Series of Luminaires AadynTech has expanded its line with the Quad Series of luminaires. The new JAB Quad uses the equivalent power of four JAB fixtures designed in a very powerful, soft panel light configuration. It is a completely weatherproof, IP65 rated light with an output of 120,000 lumens -- according to the company, "more than twice the output of any leading competitor." Additionally, the JAB Quad consumes only 1,300W of power at full brightness, so it can operate on a single 20A circuit. The CRI is 92+ and it has a full range of +- green/magenta color control. With an aperture of 24" x 18", the JAB Quad is bright enough to be used outside in the daytime, and it can also be used to replace a 6K space light. The beam is very smooth, so no further diffusion is usually needed. At 278,000 Lumens, the Punch Quad's aperture is 36" x 24" and has the equivalent output of four of our popular Punch fixtures in a soft panel, high quality, IP65 rated fixture. This is the first high efficiency LED light built to compete with very large HMI's while consuming 10% of the power. The Quads come in daylight, tungsten, or variable, with a range of 2,900K to 6,000K. They can be controlled in three ways: AAdynTech's User Interface Module, wired DMX, or wireless DMX. Both lights are designed with four lifting eyes evenly located on the back side of the fixture and can easily be supported from above and used as a space light. For flicker-free performance, both the JAB and Punch Quad fixtures have been verified up to an amazing 260,000 fps! The IP65 rated Quads come with a medium diffusion lens, IP65 control box and 20' control cable, power cable, user interface controller, City Theatrical wireless receiver chip and antenna, yoke and pin. Grids, soft boxes, lite and heavy diffusers, and road cases are some of the accessories that are offered with each series. For more information, visit the URL below. 
|
